Septic Tank Cleaning Miami, FL | All Counties Plumbing Inc
Septic Tank Cleaning is an important part of maintaining your septic system. How often you need to have the tank cleaned will depend on several factors, including how many people are in your household, what type of soil is through which the waste water passes, and how much solid waste material is being discharged into the system. Most septic service companies recommend that you pump off your septic tank every three to five years. The frequency of pumping varies depending upon whether there is a toilet with a flush mechanism or just a typical outhouse-type arrangement for disposing of waste materials such as used bath water and laundry wastes. When there’s no flush mechanism involving more water usage, you’ll find that more frequent septic tank pumping will be necessary to keep the whole system afloat.
Septic Tank Pumps
Most septic tanks are equipped with a small electric or gas-powered pump that is used for transferring the waste material from within the tank into the drain field. When you need to have your system pumped, this means that it’s time to change out the septic tank pump as well. No matter how often your facility cleans and inspects its septic system, you will find it necessary to change out and cleanse the tank pump at least every three years in order to maintain system performance. You can also opt to purchase your septic tank pump wherever you bought the other components for your system, typically at a building supply store or online.
Septic Tank Bacteria
The other thing that should be done after having the septic tank pumped out is to add bacteria to the system. This bacterial additive will help to speed up the process of decomposition, while also helping to break down tissue and grease wastes in order reduce future issues with clogs and backups. The cost of adding these bacterias varies depending on local area prices, but shouldn’t be costly as this only needs to be done every 3 years or so. If this schedule isn’t followed, then problems such as septic odors and backups may appear.
Septic Tank Installation
In some cases, a new septic tank installation is required in order to overcome soil conditions that have caused the existing system to fail. If the drain field has been damaged from flooding or another cause, then you may need a new system installed altogether. In order to install a brand-new system, you’ll want to hire a contractor who specializes in septic systems and also wastewater treatment plants. This will help ensure that your raw waste water will be getting treated before it’s returned back into the environment in an appropriate form for other forms of life to make use of it safely. The cost for installing a brand-new waste removal system can vary depending upon factors such as soil type and topography of the land on which it is being installed.
Septic Tank Maintenance
Maintaining a septic tank properly means pumping it out every 3-5 years, depending upon how frequently waste materials are discharged into the system and the septic tank size. Smaller tanks may need more frequent maintenance as they fill up quicker and their systems don’t have as much power. It is important to use only local suppliers that clean septic tanks for your area. Local companies understand the soil conditions and how best to de-sludge (remove solids) or de-fat (remove grease) your system without causing further damage.
How are septic tanks pumped?
The first step in pumping out a septic tank is to locate it, which can be tricky if you don’t know where to look. If the tank is relatively small and buried below grade, this may not be much of a problem. However, in cases where the system has been installed in an area that’s subject to regular flooding or erosion, locating your tank(s) may prove more challenging. Septic tanks are typically located either in a pit dug out from the ground, or they’re installed above ground and covered by a concrete slab.
Once you’ve discovered your septic tank system(s), the next step is opening them up for cleaning. In most cases, the tank is accessed through a concrete lid that’s situated just above grade level. This slab may be either flush with the surrounding ground or it may be raised up approximately six inches off of the surface, which will make cleaning out the tank a bit easier for your local septic service provider. In addition to this cover, some tanks are equipped with additional equipment at the same grade level, such as an access port for adding bacterial additives or removal ports for raking sediment from inside of them.
Ways to keep your Septic Tank Systems cleaner for longer:
- Eliminating or limiting the use of a garbage disposal connected to the septic system will significantly reduce the amount of fats, grease, and solids that enter your septic tank.
- Avoid flushing or draining all of the following items, as to not cause clogging or damage to the septic tank: Disposable diapers, Sanitary napkins, Kitchen Greases and oils (olive oil, vegetable oil, etc.)